Operation and configuration
8.3 Additional drivers and applications
SIMATIC HMI IPC677C
84 Operating Instructions, 04/2013, A5E02722710-04
8.3.3 Extended Touch touch functionality
Procedure
1. Select "Start > Programs > UPDD > Settings". The "UPDD Console" dialog box opens.
2. Select the corresponding controller.
The "Extended touch" option is preset.
Note
Extended touch applies only to the Windows 7 Ultimate operating system.
If "Extended touch" is selected, the extended touch functions of Windows 7 will be available,
such as operating touch permanently, which corresponds to the right mouse button function.
To Next Page
Loading...
