Detailed descriptions
16.6 Communications processor CP 1616 onboard
SIMATIC HMI IPC677C
258 Operating Instructions, 04/2013, A5E02722710-04
16.6.3 Further actions in STEP 7/NCM PC
Configuring
Your PC is now ready, although you still have to configure the SIMATIC NET communication
software. The rest of the procedure is described in the "Commissioning PC Stations" manual
(on the Windows PC that also contains STEP 7/NCM PC: Start > Simatic > Documentation >
English > Commissioning PC Stations).
To Next Page
Loading...
