Integration into an automation system
6.5 PROFINET
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
57
6.5 PROFINET
CP 1616 onboard
The basic characteristics of the CP 1616 onboard are:
● Optimized for PROFINET IO
● With Ethernet-Real-Time-ASIC ERTEC 400
● Three RJ45 sockets for connecting terminal devices or addition network components
● Integrated 3-port real-time switch
● Automatic hardware detection
NOTICE
Only one CP 1616 can be installed in a PC. If you want to use an additional CP 1616
module, the "CP 1616 onboard" option must be disabled in the BIOS Setup.
To Next Page
Loading...
