Siemens SIMATIC HMI IPC677C - Key Panel Adjustment; Windows 7 (32 and 64-Bit); Installation Software

Commissioning
7.6 Windows 7 (32 and 64-bit)
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
65
7.5.2 Key Panel adjustment
Note
The configuration of the HMI device will be detected and set automatically.
1. Use the "Finish" button to terminate the wizard. The HMI device will be automatically
restarted for the respective configuration.
7.6 Windows 7 (32 and 64-bit)
7.6.1 Installation software
First commissioning
● The "SIMATIC IPC Wizard" program is automatically started once during the first
commissioning.
● The wizard will automatically set the device-specific drivers and applications at the initial
start of the operating system.
● The hardware is detected automatically.