Commissioning
7.6 Windows 7 (32 and 64-bit)
SIMATIC HMI IPC677C
66 Operating Instructions, 04/2013, A5E02722710-04
Procedure
1. Start the device with unchanged factory settings.
2. Follow the instructions displayed on the screen.
Note
Malfunctions
Do not switch off the device during the software installation. Follow the instructions that
appear on the screen right to the end of installation.
The dialogs can differ for different Windows operating systems.
The PC will restart after installation is complete.
Additional information about the IPC wizard software can be found in the "SIMATIC IPC
Wizard" operating manual on the included "Documentation and Drivers" DVD.
To Next Page
Loading...
