Siemens SIMATIC HMI IPC677C User Manual

Detailed descriptions
16.4 BIOS-Setup
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
233
16.4.6 "Advanced, Active Management Technology Support" menu
Settings in the BIOS
The following figure shows the BIOS submenu "Advanced Menu > Active Management
Technology Support", in which you configure part of AMT in the BIOS. You will find further
configuration options for AMT in the MEBx (see "Settings in the MEBx").
Entry Meaning
Intel AMT Support Enable and disable BIOS support for Intel Active Management
Technology (AMT)
Intel AMT Setup Prompt Enable and disable the boot interruption <Ctrl+P> to call up the MEBx
configuration page.
AMT CIRA Request Trig Enable CIRA (Client Initiated Remote Access, "Fast Call For Help").
CIRA allows AMT maintenance event if the AMT PC is not in the
intranet.
AMT CIRA Timeout CIRA timeout for connection establishment with MPS (Manageability
Presence Server / "vPro Enabled Gateway").
Un-Configure ME Resets all the values of the MEBx to their defaults (see section "Reset
with Un-Configure").
USB Configure Enable and disable the USB configuration (provisioning).

Siemens SIMATIC HMI IPC677C Specifications

General

Brand	Siemens
Model	SIMATIC HMI IPC677C
Category	Industrial PC
Language	English