Detailed descriptions
16.4 BIOS-Setup
SIMATIC HMI IPC677C
238 Operating Instructions, 04/2013, A5E02722710-04
16.4.8 Power menu
The behavior of the device after a power failure and after wake events is specified in this
menu.
Figure 16-14 Power menu
Entry Meaning
Wake on LAN 1 Device can be activated by an event via LAN.
Wake on PME/LAN 2 The device switches on when a Power Management Event occurs.
Wake on Time The device switches on at a moment to be specified when it is in
the operating state S5.
After Power Failure Specification of the device behavior after a voltage failure and
voltage recovery.
• [Power On]: After voltage failure and subsequent voltage
restoration, the device switches on automatically.
• [Stay Off]: After voltage failure and subsequent voltage
restoration, the device remains switched off.
• [Last State]: If the device was switched on when the power
failure occurred, the device switches on when the voltage is
restored.
Otherwise, the device remains switched off when the voltage is
restored.
To Next Page
Loading...
Need help?
General
