Siemens SIMATIC HMI IPC677C - Page 246

Detailed descriptions
16.4 BIOS-Setup
SIMATIC HMI IPC677C
246 Operating Instructions, 04/2013, A5E02722710-04
System parameters Default settings Local settings
Advanced>CPU Configuration
P-States (IST) Enabled
Turbo Mode Enabled
CMP support Auto
HT Support Auto
Use XD Capability Disabled
VT Support Enabled
Turbo Mode Enabled
C-States Enabled
System parameters Default settings Local settings
Advanced>Active Management
Technology Support
Intel AMT Support Disabled
Intel AMT Setup Prompt Disabled
AMT CIRA Request Trig Disabled
AMT CIRA Timerout 30
Un-Configure ME Disabled
USB Configure Disabled
System parameters Default settings Local settings
Advanced
Fan control Enabled
System parameters Default settings Local settings
Security
Supervisor Password Not installed
User password Not installed
Set Supervisor Password Inactive (no password assigned)
Set User Password Inactive (no password assigned)