Operation and configuration
8.3 Additional drivers and applications
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
93
3. Click on the "Settings" button. The "BbcScreenSaver" dialog box opens.
The following figure shows the dialog box using an example with two devices. A
secondary device is optional and is not supported by all devices.
4. Set the desired brightness value for the activated display using the slider or the "-" and
"+" buttons.
Note
The set value is retained following a restart and you can only change it in the
"BBCScreenSaver" dialog box.
5. Under "Background" select from the following options:
– "Blank screen": The desktop is shown with a black background.
– "Show desktop": The desktop will be transparent.
6. Confirm the set values with "OK" or terminate the input with "Cancel" without saving the
modified settings.
Note
If you set the value 0, the backlighting of all connected monitors is turned off.
To Next Page
Loading...
