Siemens SIMATIC IPC PX-39A PRO - Page 10

SIMATIC IPC PX-39A PRO
10 Operating Instructions, 11/2022, A5E51699950-AA
Product description
1
1.1 Important instructions and manuals for operating the device
Documentation
Contents
Source
Operating instructions
• Product description
• Technical specifications
• Installation of the device
• Operation of the device
• Installing and removing hard-
ware
• Dimension drawings
• Online at:
SIMATIC IPC Documentation
(http://www.siemens.com/simatic
-ipc-doku-portal)
Quick Install Guide
Information on:
• Operating Instructions of the
device
• Installation of the device
• Steps for connecting the device
to the power supply
• Connecting I/O devices
• Switching the device on
• Supplied in printed form with the
device
Current product infor-
mation
• Current notes on the device
• Changes compared with these
operating instructions
• Online at:
SIMATIC IPC Documentation
(http://www.siemens.com/simatic
-ipc-doku-portal)
Firmware/BIOS descrip-
tion
Information on:
• Important firmware settings
• Firmware settings in the factory
state
• Boot modes
• Online at:Firmware/BIOS descrip-
tion SIMATIC IPC BX-39A, IPC PX-
39A, IPC PX-39A PRO
(https://support.industry.siemens.
com/cs/ww/en/view/109811365)
Windows® operating sys-
tem
Information on:
• Commissioning the operating
system
• Restoring the operating system
• Configuration of the operating
system
• Online at:
Microsoft® Windows® 10
(https://support.industry.siemens.
com/cs/ww/en/view/109749498)