Siemens SIMATIC IPC PX-39A PRO - Canada; Australia; New Zealand; Eurasion Customs Union EAC; Korea

Technical specifications
8.6 Technical specifications of the drives
SIMATIC IPC PX-39A PRO
92 Operating Instructions, 11/2022, A5E51699950-AA
Air pressure
in accordance with IEC 60068-2-13
Operation
1080 to 795 hPa, corresponds to an altitude of -1000 to 2000 m
Storage/transport
1140 to 658 hPa, corresponds to an altitude of -1000 to 3500 m
Mechanical environmental conditions
Vibration
Tested according to IEC 60068-2-6
Operation
5 to 8.4 Hz: 3.5 mm, 8.4 to 200 Hz: 9.8 m/s
2
Storage/transport
5 to 8.4 Hz: 3.5 mm, 8.4 to 500 Hz: 9.8 m/s
2
Resistance to shock
Tested according to IEC 60068-2-27, IEC 60068-2-29
Operation
Half-sine 50 m/s
2
, 30 ms
Storage/transport
Half-sine 250 m/s
2
, 6 ms
1
The CPU performance settings can be made in the BIOS Setup, menu "Advanced" >
"Power&Performance" > "CPU Power Management Control" > "Power&Performance Sce-
nario".
2
Standard operating position: Vertical installation in horizontal format
3
Inclined installation in horizontal format with a vertical inclination of maximum ±45 °
8.6 Technical specifications of the drives
See the note in "Applicability of technical specifications (Page 88)".
SSD
M.2 NVMe SSD >= 256 GB, form factor 22 mm x 30 mm, type M
8.7 Technical specifications of the motherboard
See the note in "Applicability of technical specifications (Page 88)".
Chip set
Intel® RM590E
Processor
• Intel® Celeron® 6600HLE 2 cores/2 threads,
2.1 GHz, 8 MB cache, ECC, TCC
• Intel® Xeon® W-11155MLE 4 cores/8 threads, 1.8 (3.1) GHz,
8 MB cache, ECC, TCC
• Intel® Xeon® W-11555MLE 6 cores/12 threads, 1.9 (4.4) GHz,
12 MB cache, vPro (iAMT), ECC, TCC
• Intel® Xeon® W-11865MLE 8 cores/16 threads, 1.5 (4.5) GHz,
24 MB cache, vPro (iAMT), ECC, TCC
Main memory
4 up to 32 GB, DDR4 SDRAM, SODIMM
see ordering documents for features
Buffer memory
512 KB NVRAM
Expansion slot
Refer to "Current and power requirements of the system compo-
nents (Page 90)" for information on the maximum allowable per-
formance values of the expansion slot.