Siemens SIMATIC IPC PX-39A PRO - Safety Instructions; General Safety Instructions

Product description
1.6 System components
SIMATIC IPC PX-39A PRO
Operating Instructions, 11/2022, A5E51699950-AA
19
1.6 System components
1.6.1 Base adapter
PRO devices of the type "suitable for support arm" or "suitable for stand" can be mounted on a
support arm or stand using the base adapter. Depending on the support arm system used, an
adapter plate may have to be installed in addition.
A base adapter is included with the corresponding PRO devices. The base adapter can also be
ordered separately.
①
Seal
②
Cable channel
③
Mechanical interface to the PRO device
④
Cover
⑤
Mechanical interface to support arm or stand
Article number for the base adapter as accessory: 6AV7674-1KA00-0AA0.