Siemens SIMATIC IPC PX-39A PRO - Notes on Mounting; Notes on Ambient and Environmental Conditions

Product description
1.6 System components
SIMATIC IPC PX-39A PRO
22 Operating Instructions, 11/2022, A5E51699950-AA
1.6.3 Cover plate
Cover plate
A cover plate is available for the device version "Prepared for support arm and expansion
elements (round tube)", which is included in the scope of delivery of the device version
together with 4 M4x12 screws.
More information
For information on mounting the cover plate on the device, see "Prepared for support arm
and extension elements (flange mount) (Page 46)".
1.6.4 Adapter set for support arm and stand mounting of PRO device
The PRO device can be mounted on systems from third-party vendors (see "Mounting the
device (Page 41)"). For this, you will need the Siemens Base adapter (Page 19) and a
proprietary adapter set.
Siemens also offers its own adapter for VESA-compatible third-party systems:
Adapter set
Suitable for support arm systems
Article number
SIEMENS:
• Adapter set VESA75
• Adapter set VESA100
• VESA75-compatible systems
• VESA100-compatible systems
• 6AV7674-0KE00-0AA0
• 6AV7674-0KD00-0AA0
RITTAL:
Adapter for
Siemens PRO-Panel
• Intermediate plate
• Screws
• CP40 steel
• CP60/120 for
Support arm connection
120 × 65 mm
• 6206.500
ROLEC:
Adapter for
Siemens PRO-Panel
• Intermediate plate
• Screws
• profiPlus-50
• taraPLUS for ∅ 65 mm hole cir-
cle
• 142.024.000
BERNSTEIN:
Coupling for Siemens SIMATIC
PRO
• No intermediate plate re-
quired
• Coupling with integrated
adaptation for PRO device
• CS-3000 • 1015300187 RAL 9006
white aluminum
• 1015300043 RAL 7016 an-
thracite gray
Information provided without guarantee.