Siemens SIMATIC IPC PX-39A PRO - Markings and Symbols; Overview; Safety; Operator Controls

SIMATIC IPC PX-39A PRO
Operating Instructions, 11/2022, A5E51699950-AA
109
Standards and approvals
10
10.1 Scope
Note
Scope
The possible approvals are described below. The approvals applicable to your device are
indicated on the nameplate.
10.2 CE marking
The device meets the general and safety-related requirements of the following directives and
conforms to the harmonized European standards (EN) published in the official gazettes of the
European Union:
• 2014/30/EU "Electromagnetic Compatibility Directive" (EMC Directive)
The device is designed for the following areas of application corresponding to the CE
marking:
Scope of application
Requirement for
Interference emis-
sion
Immunity to inter-
ference
Industry
EN 61000-6-4
EN 61000-6-2
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
Panel PC certificates
(http://support.automation.siemens.com/WW/view/en/10805572/134200).