Siemens SIMATIC IPC PX-39A PRO - Installing and Connecting the Device; Preparing for Installation; Scope of Delivery

SIMATIC IPC PX-39A PRO
26 Operating Instructions, 11/2022, A5E51699950-AA
Safety instructions
2
2.1 General safety instructions
WARNING
The installer of the system is responsible for the safety of a system in which the device
is integrated.
There is a risk of malfunction which could result in death or serious injury.
•
Ensure that only suitably qualified personnel perform the work.
Risk due to electric shock
WARNING
Risk of electric shock
The on/off button and on/off switch do not fully disconnect the device from the supply
voltage.
There is also a risk of fire if the device or connecting lines are damaged.
• Always fully disconnect the device from the supply voltage before performing work on
the device or when the device will not be used over an extended period of time.
• For control cabinet mounting: Use a central, easily accessible AC circuit breaker close to
the device, if possible.
•
When you install the device, ensure that the power supply connector is easily accessible.
Risk of lightning strikes
DANGER
Risk of lightning strikes
A lightning flash may enter the mains cables and data transmission cables and jump to a
person.
Death, serious injury and burns may result.
• Disconnect the device from the power supply in good time when a thunderstorm is
approaching.
• Do not touch power cables and data transmission cables during a thunderstorm.
•
Keep sufficient distance from electric cables, distributors, systems, etc.