Siemens SIMATIC IPC PX-39A PRO - Dimension Drawings; Dimension Drawing - Mounting on a DIN Rail

Device maintenance and repair
7.4 Removing and installing hardware
SIMATIC IPC PX-39A PRO
Operating Instructions, 11/2022, A5E51699950-AA
83
Procedure
1.
Remove the battery from socket as
shown.
2.
Place the new battery below the two con-
tacts (1) and press it into the base (2)
while applying slight pressure.
3.
Close the device.
4.
Check the firmware/BIOS settings.