Technical support
B.2 Troubleshooting
SIMATIC IPC BX-39A
Operating Instructions, 07/2022, A5E50715883-AA
107
Wrong time and/or date on the
PC.
1. Call the firmware/BIOS configuration menu. To do
this, press the "<Esc>" button during the boot
process and then select "Setup Utility".
2. Set the date and time in the "Main" tab and save
Time and date are still incor-
rect, even after correct setting
The backup battery is dead.
Replace the backup battery.
USB device not responding.
USB ports are disabled in the firm-
ware/BIOS
Use a different USB port or activate the port.
Operating system does not support
the USB port.
For other devices, you need the USB device drivers
for the required operating system.
To Next Page
Loading...
Need help?
General
