Siemens SIMATIC IPC RW-543A - Page 101

BIOS description
11.3 Advanced menu
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
101
System parameters Function description Configuration
options
Default setting
The following options show only when "PCI1&PCI2 SLOTS" = Enabled.
• PCI Speed
Configure PCI Speed.
• [Auto]
• [Gen1]
• [Gen2]
• [Gen3]
[Auto]
• Detect Non-
Compliance
Device
Detect Non-Compliance PCI Express Device in PCI1&PCI2
SLOTS.
• [Enabled]
• [Disabled]
[Disabled]
MiniPCIE
Control the MiniPCIE.
• [Enabled]
• [Disabled]
[Enabled]
The following options show only when "MiniPCIE" = Enabled.
• PCIe Speed
Configure PCIe Speed.
• [Auto]
• [Gen1]
• [Gen2]
• [Gen3]
[Auto]
• Detect Non-
Compliance
Device
Detect Non-Compliance PCI Express Device in MiniPCIE.
• [Enabled]
• [Disabled]
[Disabled]
PCH-FW Configuration
This page displays the information of the connected M.2 devices.
System parameters Function description Configuration
options
Default setting
ME State
The state of management engine(ME).
• [Enabled]
• [Disabled]
[Enabled]
The following options show only when "ME State" = Enabled.
Firmware Update
Configuration
Configure Management Engine Technology Parameters.
• Me FW Image Re-
Flash
Enable or disable Me FW Image Re-Flash function.
• [Enabled]
• [Disabled]
[Disabled]
• FW Update
Enable or disable Me FW update function.
• [Enabled]
• [Disabled]
[Enabled]