Siemens SIMATIC IPC RW-543A User Manual

BIOS description
11.3 Advanced menu
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
97
Secure Boot
System parameters Function description Configuration
options
Default
setting
Secure Boot
Set the secure boot. Platform key (PK) is enrolled and the
system is in user mode. The mode change requires
platform reset.
• [Enabled]
• [Disabled]
[Disabled]
Secure Boot Mode
Select the Boot Mode:
• [Standard]: A standard mode.
• [Custom]: In this mode, Secure Boot policy variables
can be configured by a physically present user without
full authentication.
• [Standard]
• [Custom]
[Custom]
Key
Manage
ment
Factory Key
Provision
Install factory default secure boot keys after the platform
reset and while the system is in Setup mode.
• [Enabled]
• [Disabled]
[Disabled]
Device Guard
Ready
Secure Boot Defaults.
None
None
Secure Boot
variable
11.3 Advanced menu
Advanced menu
The Advanced menu allows you to change the settings for the CPU and other system devices.
Note
Be cautious when changing the settings of the Advanced menu. Incorrect field value can
cause the system to malfunction.
CPU Configuration
In the CPU configuration page, you can check and configure the CPU-related information that
the BIOS automatically detect.
System
parameters
Function description Configuration
options
Default setting
Turbo Mode
Enable or disable the processor Turbo Mode.
• [Enabled]
• [Disabled]
[Enabled]
Intel (VMX)
Virtualization
Technology
Enable or disable the intel virtualization technology.
• [Enabled]: A VMM can utilize the additional hardware
capabilities provided by Vanderpool Technology.
• [Disabled]: Disable this function.
• [Enabled]
• [Disabled]
[Enabled]

Siemens SIMATIC IPC RW-543A Specifications

General

Brand	Siemens
Model	SIMATIC IPC RW-543A
Category	Industrial PC
Language	English