SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
93
BIOS description
11.1 BIOS getting started
BIOS setup utility: Aptio TSE
The BIOS is developed on AMI based code. AMI provides Aptio
TM
Text Setup Environment
(TSE), a test-based basic input and output system as BIOS setup utility. The purpose of Aptio
TM
TSE is to empower the user with complete system control at boot.
Getting BIOS setup
To enter BIOS Setup at startup:
1. Power on the device.
2. Press ESC key on your keyboard during the Power - On - Self - Test (POST) when the
SIEMENS logo is shown on screen.
The Aptio
TM
TSE main BIOS setup menu is displayed.
You can access the other setup screens from the main BIOS setup menu, such as
'Advanced' menu.
ESC is not pressed, POST continues its routines.
If the timing is missed for entering BIOS setup during POST, a system reset is required by one
of following methods:
Press CTRL + ALT + DELETE simultaneously.
Press the power button to turn off system then turn it on.
To Next Page
Loading...
Need help?
General
