Commissioning the device
4.2 Switching off the device
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
45
Hardware reset
With the hardware reset, you can restart the device if it does not respond to keyboard or
mouse input. Any running operating system will not shut down safely.
Data loss
If a hardware reset is performed, the device undergoes a hard reboot.
• Data in the main memory is deleted.
• Data on the data storage media might be lost.
• The device might be damaged.
Perform a hardware reset only in the case of an emergency.
Hardware reset with on/off button:
• Press the on/off button for more than 4 seconds.
– The unit switches off.
– Press the power button again to turn the device back on.
Information on the position of the buttons is available under "Operator controls (Page 15)".
To Next Page
Loading...
Need help?
General
