Previous versions
C.2 Discontinued SLG with ANT D5
MOBY D
322 System Manual, 01/2010, J31069-D0147-A6-7618
FCC information
Siemens MOBY D SLG D11
FCC ID: NXW-MOBYD-SLGD11
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference that may cause undesired operation.
Note
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
changes and modifications to this equipment:
Such modifications could void the user's authority to operate the equipment.
IC information
The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit RF field in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada's website www.hc-sc.gc.ca/rpb.
This device has been designed to operate with only the antennas as described in this
manual. Use of further antennas is strictly prohibited per regulations of Industry Canada. The
required antenna impedance is 50 ohms.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Field data
Table C- 12 Field data for SLG D11 ANT D5
Limit distance (S
g
) max. 380 mm (dependent on transponder)
Operating distance (S
a
) 0 to 300 mm (dependent on transponder)
Length of the transmission window (L
d
) 300 mm
Width of the transmission window (W) 120 mm
Min. distance from ANT D5 to ANT D5 ≥ 2 m
To Next Page
Loading...
Need help?
General
