PLC device configuration
6.1 Configuring the operation of the PLC system
S7-200 SMART
158 System Manual, V2.3, 07/2017, A5E03822230-AF
Configuring the TC analog inputs
Click the TC (Thermocouple) analog input node of the system block (Page 133) dialog to
configure options for a TC analog input module that you have selected in the top section.
Note
The CPU models CPU CR20s,
CPU CR30s, CPU CR40s, and CPU CR60s do not support
the use of expansion modules or signal boards.
The TC analog expansion module measures the value of voltage connected to the module
inputs.
Thermocouple type configuration
For each TC analog input module channel, you configure the type, choosing one of the
following options:
● Thermocouple
● Voltage
To Next Page
Loading...
