Siemens SIMATIC S7 - EM DP01 PROFIBUS DP Module

Technical specifications
A.10 EM DP01 PROFIBUS DP module
S7-200 SMART
System Manual, V2.3, 07/2017, A5E03822230-AF
775
A.10
EM DP01 PROFIBUS DP module
Table A- 155 General specifications
Technical data
EM DP01 PROFIBUS DP
Article number
6ES7288-7DP01-0AA0
Dimensions W x H x D (mm) 70 x 100 x 81
Weight
176.2 g
Power dissipation 1.5 W (no load)
V DC requirements
+5 V DC (SM Bus)
150 mA (no load)
+24 V DC
See below
Table A- 156 EM features
Technical data
EM DP01 PROFIBUS DP module
Number of ports (limited pow-
er)
1
Electrical interface
RS485
PROFIBUS DP / MPI baud
rates (set automatically)
9.6, 19.2, 45.45, 93.75, 187.5, and 500 Kbps; 1.5, 3, 6, and 12 Mbps
Protocols
PROFIBUS DP slave and MPI slave
Cable length
Up to 93.7 Kbps
1200 m
187.5 Kbps
1000 m
500 Kbps
400 m
1 to 1.5 Mbps
200 m
3 to 12 Mbps
100 m
Network capabilities
Station address settings 0 to 99 (set by rotary switches)
Maximum stations per seg-
ment
32
Maximum stations per net-
work
126, up to 99 EM DP01 stations
MPI connections
6 total (1 reserved for an OP)