Siemens SIMATIC S7 - SMB600-SMB749: Axis (0, 1, and 2) Open Loop Motion Control

Special memory (SM) and system symbol names
D.23 SMB600-SMB749: Axis (0, 1, and 2) open loop motion control
S7-200 SMART
824 System Manual, V2.3, 07/2017, A5E03822230-AF
D.23
SMB600-SMB749: Axis (0, 1, and 2) open loop motion control
Axis configuration and control SM addresses
Wizard-generated program code reads and writes the axis special memory data.
Axis data SM address
Axis function
Axis 0
Axis 1
Axis 2
SMB600-
SMB615
SMB650-
SMB665
SMB600-
SMB615
Axis name (16 ASCII characters). The first character is the lowest numbered byte in
the sequence.
SMB616-
SMB619
SMB616-
SMB619
SMB616-
SMB619
Reserved
SMW620
SMW670
SMW720
Error code - See Axis of Motion error codes (Page 658)