Diagnostics
4.5 SINAUT special diagnostics
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
145
0 = error-free signal
99 = loss of synchronization
● Local area code
Location of area in the mobile wireless network
● Cell ID
Identification number of the active GSM cell
● Data sent [bytes] / Data received [bytes]
Volumes of data in bytes at the following times:
– Current count
Current counter reading: Volume of data since the first station TIM startup to the
present time
– Count in previous month
Volume of data at the last change of month (1st day of the month)
Buttons in the
MSC Communication
tab
● Update
The "Update" button updates the data of the following stations:
– No station selected: The data of all stations is updated.
– One station selected: The data of the selected station is updated.
The requested data can take up to 1/2 a minute.
● Print...
Opens a follow-on dialog from which you can print the displayed information.
● Save...
Opens a follow-on dialog from which you can save the displayed information in a text file.
TIM subscriber diagnostics
4.5.3.1
TIM Subscriber Diagnostics - functions
Description of the functions
The TIM subscriber diagnostics function displays the diagnostic data of the known SINAUT
subscribers of the connected TIM module. The following detailed information is available:
● Selection list of the known subscribers (on the left):
The selection list of the known subscribers is used to select individual subscribers known
to the connected TIM module allowing the information to be displayed in the tabs on the
To Next Page
Loading...
Need help?
General
