Siemens SIMATIC TeleControl DNP3 User Manual

WBM of the TIM 1531 IRC
C.9 Telecontrol
Configuration - DNP3
180 Configuration Manual, 11/2018, C79000-G8976-C508-01
C.9
Telecontrol
C.9.1
Partner information
C.9.1.1
Connection overview
The tab shows you information on the communications partners and the connection status of
the TIM.
Table
The column headers have the following meaning:
●
Connection status
The status of the connections to the assigned CPU and to the remote partners is shown
as follows:
–
Green: Connected
All connections are established.
–
Yellow: Connected
Some of the possible connections are established.
–
Red: Disconnected
None of the possible connections is established
●
Partner
Possible partner types:
– Local CPU
The CPU assigned to the TIM in the configuration.
– Application
(e.g. WinCC)
– TIM
TIM of the remote station
– Partner CPU
CPU of the remote station
– CP ...
CP of the remote station (CP 1243-8 IRC / CP 1542SP-1 IRC)
●
Subscriber number
Subscriber number of the partner
When you click on the '±' icon in a table row, the relevant parameters are displayed.

Siemens SIMATIC TeleControl DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TeleControl DNP3
Category	Control Unit
Language	English