Functions and requirements
1.3 Usable CPUs
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
15
Usable CPUs
Compatible CPUs
The following can be configured as assigned CPUs of the communications modules:
●
– S7-1500
All CPUs as of firmware version V2.1
– S7-300
All CPUs with PROFINET interface
– S7-400
All CPUs with PROFINET interface
●
CP 1243-1 / CP 1243-8 IRC
CPU with firmware version as of V4.2
●
CPUs as of firmware version V2.0:
– CPU 1510SP-1 PN
– CPU 1510SP F-1 PN
– CPU 1512SP-1 PN
– CPU 1512SP F-1 PN
You will find more detailed information on the CPUs and the BusAdapters in the manual
/5/ (Page 188).
Software requirements
Software for configuration and online functions
To configure the modules, the following configuration tool is required:
● STEP 7 Professional V15.1
To Next Page
Loading...
Need help?
General
