Configuration
3.4 Configuration of interfaces, networks and network nodes
Configuration - DNP3
38 Configuration Manual, 11/2018, C79000-G8976-C508-01
– MD720
The GSM modem MD720 is not supported because it uses frame format FT2.
– Third-party modem
Any compatible modem for the network types "Dedicated line" or "Dialup network"
(analog / ISDN / GSM)
Networking of the interfaces
Module interfaces
The arrangement of the module interfaces in the STEP 7 device symbol (network view)
corresponds largely to the structure of the respective device.
For example, the interfaces of a TIM 1531 IRC are arranged as follows:
Figure 3-1 Device symbol of the TIM with interface numbers
To network an interface depending on the initial situation you have different options:
● Creating a subnet
● Connecting two target devices via a new subnet
● Connecting devices to existing subnet
● Selecting an existing subnet from the "Subnet" list
You will find the description of the individual methods in the STEP 7 information system.
To Next Page
Loading...
Need help?
General
