WBM of the TIM 1531 IRC
C.4 Start page
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
169
The automatic update of the WBM display is enabled. The data is
fetched at the interval configured under "System > Web server".
The automatic update of the WBM display is disabled.
Switches on the automatic update of the WBM display.
Switches off the automatic update of the WBM display.
Prints out the current WBM page
After logging in to the WBM, the start page appears.
On the left you will find the navigation area with the main levels of the WBM.
By clicking on an entry in the navigation area on the left open the WBM page you want for
further information or on which you want to configure or program.
The WBM opens the first tab of the entry.
On other pages with several tabs change to the relevant tab by clicking on the tab name.
To Next Page
Loading...
Need help?
General
