WBM of the TIM 1531 IRC
C.9 Telecontrol
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
183
●
Display of several of the following connection properties:
– PBK connection
Configured S7 connection
– ST7
ST7 connection via classic WAN
– DNP3
DNP3 connection via classic WAN network
– IEC
IEC 60870-5-101 connection via a classic WAN network
– MSC connection
Only ST7: Connection of the MSC protocol for which no S7 connection is required.
– CR connection
Read/write connection to the local CPU that does not require an S7 connection.
– X connection
Unconfigured S7 connection that uses the SFCs "X_SEND" and "X_RCV".
– Permanent / temporary
Permanent or temporary telecontrol connection
– GPRS / no GPRS
GPRS connection or no GPRS connection
– local / remote
Connection to a local or remote partner
●
– Connected
– Disconnected
The tab provides information on the send buffer (frame memory) of the local or remote TIM.
Information on the send buffer
Information on the send buffer of the TIM:
●
Configured size of the send buffer as number of memory spaces
One memory space is reserved per frame.
To Next Page
Loading...
Need help?
General
