Siemens SIMATIC TeleControl DNP3 User Manual

Diagnostics
4.7 Maintenance
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
155
Status
Meaning
84xx Other error message from the e-mail server
Apart from the leading "8", the message corresponds to the three-digit error number of the
SMTP protocol.
8500 Syntax error: Command unknown.
This also includes the error of having a command chain that is too long. The cause may be
that the e-mail server does not support the LOGIN authentication method.
Try sending e-mails without authentication (no user name).
8501 Syntax error. Check the following configuration data:
Alarm configuration > E-mail data (Content):
• Recipient address ("To" or "Cc").
8502 Syntax error. Check the following configuration data:
Alarm configuration > E-mail data (Content):
• Email address (sender)
8535 SMTP authentication incomplete. Check the "User name" and "Password" parameters in
the configuration.
8550 SMTP server cannot be reached. You have no access rights. Check the following configu-
ration data:
• Module configuration > E-mail configuration:
– User name
– Password
– Email address (sender)
• Alarm configuration > E-mail data (Content):
– Recipient address ("To" or "Cc").
8554
Transfer failed
85xx Other error message from the e-mail server
Apart from the leading "8", the message corresponds to the three-digit error number of the
SMTP protocol.
4.7
Maintenance
Maintenance functions
You can find a description of the following maintenance functions in the manual of the
respective module, see Bibliography (Page 187).
● Firmware update
● Reset
● Module replacement
See also
WBM of the TIM 1531 IRC (Page 167)

Siemens SIMATIC TeleControl DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TeleControl DNP3
Category	Control Unit
Language	English