Diagnostics
4.6 Processing status of the messages (e-mail)
Configuration - DNP3
154 Configuration Manual, 11/2018, C79000-G8976-C508-01
Processing status of the telecontrol e-mails
The meaning of the statuses is as follows:
Table 4- 2 SMS: Meaning of the status ID output in hexadecimal format
Transfer completed free of errors
0001 Error in the transfer, possible causes:
• SIM card invalid
• No network
• Wrong destination phone number (number not reachable)
Table 4- 3 E-mail: Meaning of the status ID output in hexadecimal format
Transfer completed free of errors
82xx Other error message from the e-mail server
Apart from the leading "8", the message corresponds to the three-digit error number of the
8401 No channel available. Possible cause: There is already an e-mail connection via the mod-
ule. A second connection cannot be set up at the same time.
No TCP/IP connection could be established to the SMTP server.
The SMTP server has denied the login request.
8406 An internal SSL error or a problem with the structure of the certificate was detected by the
Request to use SSL was denied.
The client could not obtain a socket for creating a TCP/IP connection to the mail server.
8409 It is not possible to write via the connection. Possible cause: The communications partner
reset the connection or the connection aborted.
8410 It is not possible to read via the connection. Possible cause: The communications partner
terminated the connection or the connection was aborted.
Sending the e-mail failed. Cause: There was not enough memory space for sending.
The configured DNS server could not resolve specified domain name.
Due to an internal error in the DNS subsystem, the domain name could not be resolved.
An empty character string was specified as the domain name.
8415 An internal error occurred in the cURL module. Execution was aborted.
An internal error occurred in the SMTP module. Execution was aborted.
8417 Requests to SMTP on a channel already being used or invalid channel ID. Execution was
Sending the e-mail was aborted. Possible cause: Execution time exceeded.
8419 The channel was interrupted and cannot be used before the connection is terminated.
Certificate chain from the server could not be verified with the root certificate of the module.
Internal error occurred. Execution was stopped.
Action not executed: Mailbox not available / unreachable. Try again later.
To Next Page
Loading...
Need help?
General
