Siemens SIMATIC TeleControl DNP3 - Logging; C.10 Logging

WBM of the TIM 1531 IRC
C.10 Logging
Configuration - DNP3
186 Configuration Manual, 11/2018, C79000-G8976-C508-01
C.10
Logging
Functions of logging
On this page, you can log the data traffic of the TIM using PCAP functionality for diagnostics
purposes.
If an error occurs or if the TIM behaves in an unwanted manner, the communication behavior
of the TIM can be recorded. The frame traffic of the TIM is recorded for a defined time or for
a configurable number of frames.
The log files are stored as PCAP files on the connected PC and can be evaluated with the
Wireshark program, for example.
Options:
●
Ethernet Interface X1 / X2 / X3
Enable the interfaces for which you want to record data.
●
Data volume (kB)
Via the input box, you specify the overall size of the logging file.
Maximum file size: 10000 kB
●
Recording acc. to time
If the option is enabled, the recording is made for a configurable time.
Via the input box, you specify the recording time in seconds.
Max. recording duration: 600 s
●
Recording acc. to frames
If the option is enabled, the recording is made for a configurable number of frames.
Via the input box, you specify the number of frames.
Max. number of frames: 500 s
●
Start
With this button you start the logging.
●
Stop
With this button you stop the logging.