Diagnostics
4.5 SINAUT special diagnostics
Configuration - DNP3
152 Configuration Manual, 11/2018, C79000-G8976-C508-01
The dialog displays the following information for the station of the selected TIM module:
● The path of the TIM in the project
● The subscriber no. of the TIM
● The subscriber no. of the CPU
The lower part of the dialog displays the SINAUT objects and channels with their
parameters:
● TD7onTIM configuration:
This box lists the following directories of the selected TIM as they are successively
expanded:
– System objects (blue symbols)
– Data objects (yellow symbols)
– The cycle time
– Send and receive channels
● Properties:
This box displays the following properties of an object selected in the directory tree:
– Parameter name
– Value
– Comment
The Parameter name column lists the individual parameters with colored symbols indicating
the following status:
- Blue symbols: Configured data
- Red symbols: Online data
The cycle time is displayed in the TD7onTIM configuration box below the last data object.
This is the current time of a sampling cycle in which TD7onTIM samples the work memory of
its local CPU. If you click on the cycle time, the corresponding value is displayed in the
Properties box.
To Next Page
Loading...
Need help?
General
