Siemens SIMATIC TIM 3V-IE DNP3 - Interfaces Tab

Configuration in STEP 7
5.7 Configuring TIM modules
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
119
5.7.4
"Interfaces" tab
"Interfaces" tab
The "Interfaces" tab displays a list of interfaces of the TIM module.
Image 5-27 "Properties - TIM" dialog, "Interfaces" tab for an Ethernet TIM
If you click on an interface, the parameter box for the relevant interface is displayed below
the interface list.