Siemens SIMATIC TIM 3V-IE DNP3 - Page 169

The SINAUT Configuration Tool
6.6 TD7onTIM
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
169
Directory tree
The TD7-compliant TIM modules of a project are shown in the directory tree in the "TIMs
with TD7onTIM" directory. If you expand the directory with the (+) symbol or double-click on
the directory, the following contents are displayed:
● The "All Destination Subscribers" directory
● The directories of all TIMs with TD7onTIM
If you expand a single TIM directory, the data objects already configured on this TIM are
displayed.
Subscriber list
At the top right of the subscriber administration there is a subscriber list that lists certain
subscriber types, objects, or send/receive channels depending on what is selected in the
directory tree. By successively expanding the "TIMs with TD7onTIM" directory, the
subscriber list displays the following content:
● TD7-compliant TIMs of the project
● Destination subscribers with which the TD7-compliant TIMs can communicate
● System and data objects of a TD7-compliant TIM
● Channels of a data object
The SINAUT objects are displayed with the following symbols:
● Blue symbols: System objects
● Yellow symbols: Data objects
The channels are distinguished as follows:
● Receive channels are displayed with an incoming arrow.
● Send channels are displayed with an outgoing arrow.