The SINAUT Configuration Tool
6.7 Saving and generating system data
TIM DNP3
234 System Manual, 12/2015, C79000-G8976-C253-04
The other options relate to the scope of system data generation
● for all CPUs or
● for selected CPUs (selected in the subscriber list)
The third option relates to generating the
● subscriber number as comment for stations, CPUs and TIMs
The convenient functions described below represent the automation of several operator
control steps in the STEP 7 system. These functions always relate to all networked
subscribers; in other words, to subscribers involved in at least one telecontrol connection.
Regardless of the selected generation options, the internal data is saved and a consistent
version is always available later.
After saving the internal data, a consistency check determines whether the user data is free
of errors. If this is the case, the required functions are executed.
If problems are detected during the consistency check, the convenient functions are not
executed. An error list is displayed as well as a message indicating the functions that have
not been executed.
As soon as the generation has been completed successfully, this is indicated by a status
dialog.
Image 6-24 Status dialog after saving and generating the system data
To Next Page
Loading...
