05.01
xiv
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 05/2008 Edition
The professional associations for precision and electrical engineering specify
limits for electrical load in the workplace. Compliance with Federal Emission
Control Law is mandatory in the Federal Republic of Germany!
Adherence to the RFI suppression limits for EMC does not also ensure adher-
ence to the requirements for workplaces.
In particular, machine construction, control cabinet structure, shop environment,
infeed conditions and other installations have a substantial impact on adher-
ence to the limits required by the trade association for the respective workplace.
Therefore, the operator must always clarify whether wearers of pacemakers
may be employed at the planned workplace without endangering their health.
Health and safety
in the workplace
Forword 02.07
To Next Page
Loading...
