Siemens SIMODRIVE 611 digital - Page 20

05.01
xx
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 05/2008 Edition
8 Important Circuit Information 8-231. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.1 General information 8-231. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2 Infeed modules 8-234. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.1 Three–conductor connection (standard circuit) 8-234. . . . . . . . . . . . . . . . . . .
8.2.2 Description of the interfaces and functions 8-235. . . . . . . . . . . . . . . . . . . . . .
8.2.3 Connecting several NE modules to a main switch 8-243. . . . . . . . . . . . . . . .
8.2.4 Application, mode of operation and connection of the line contactor 8-244.
8.2.5 Timing diagram for the ready signal in the I/R module 8-245. . . . . . . . . . . . .
8.3 Axis expansion using a monitoring module 8-246. . . . . . . . . . . . . . . . . . . . . .
8.3.1 Connection example, power supply (standard) 8-246. . . . . . . . . . . . . . . . . . .
8.3.2 Connection example, pulse enable 8-247. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3.3 Description of the interfaces and functions 8-248. . . . . . . . . . . . . . . . . . . . . .
8.4 Drive modules 8-250. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4.1 611 feed module with High Performance/High Standard 8-250. . . . . . . . . . .
8.4.2 Description of the interfaces and functions 8-251. . . . . . . . . . . . . . . . . . . . . .
8.5 Start inhibit in the drive modules/safe standstill 8-253. . . . . . . . . . . . . . . . . .
8.5.1 Start inhibit applications 8-253. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.5.2 Mode of operation of the start inhibit 8-254. . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.5.3 Connecting–up the start inhibit 8-255. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.5.4 Sequence and timing when using the start inhibit 8-257. . . . . . . . . . . . . . . . .
8.5.5 Checking the start inhibit 8-258. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.5.6 Example ”safe standstill” with contactor safety combination 8-259. . . . . . . .
8.5.7 Example, ”safe standstill” for several drive groups 8-261. . . . . . . . . . . . . . . .
8.6 Application examples with SIMODRIVE 611 8-263. . . . . . . . . . . . . . . . . . . . .
8.6.1 Block diagram of the application example 8-263. . . . . . . . . . . . . . . . . . . . . . .
8.6.2 Function description of the application example 8-264. . . . . . . . . . . . . . . . . .
8.6.3 Safety systems and Standards 8-267. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.7 Circuit examples =1 to =9 with SIMODRIVE 611 8-269. . . . . . . . . . . . . . . . .
8.7.1 Function description, circuit examples =1 to =9 8-281. . . . . . . . . . . . . . . . . .
8.8 Information and instructions regarding applications
with 611 digital/611 universal 8-295. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.8.1 Circuit example, 611 digital with SINUMERIK 840D 8-296. . . . . . . . . . . . . . .
8.8.2 Circuits with 611 digital 8-296. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.8.3 Circuits with 611 universal HRS 8-297. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.9 Master/slave operation, SIMODRIVE 611 8-298. . . . . . . . . . . . . . . . . . . . . . .
8.10 Star–delta mode 8-299. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.11 Series reactor 8-302. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.12 Induction motor operation 8-304. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.12.1 Operating several induction motors in parallel 8-304. . . . . . . . . . . . . . . . . . . .
8.12.2 Selecting individual induction motors 611 8-306. . . . . . . . . . . . . . . . . . . . . . . .
8.13 Operation when the power fails 8-308. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.13.1 Application and mode of operation 8-308. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.13.2 Functions 8-308. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.13.3 DC link buffering 8-311. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.14 SINUMERIK Safety Integrated 8-312. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
05.08
Aotewell Ltd
www.aotewell.com
Industry Automation
HongKong|UK|China
sales@aotewell.com
+86-755-8660-6182