C
C-417
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 05/2008 Edition
Certificates/Declarations of Conformity
Note
An excerpt is provided from the certification of the PROFIBUS User
Organization e.V. and the certification of the ”Safe Standstill” function
The complete certification for the ”Safe standstill” function can be found as
follows:
Reference: /PJU/ SIMODRIVE 611
Configuration Manual, Drive Converters
Note
Certificates for the products described in this documentation can be found
under:
Internet: http://www.support.automation.siemens.com
Note
Listing and file names regarding UL/CSA/FM certification of SIEMENS
SIMODRIVE products can be found under:
http://intra1.erlf.siemens.de/qm/Themen/ul_approbation.pdf
http://intra1.erlf.siemens.de/qm/Themen/ul_files.html
Note
Certificates, Declarations of Conformity, test certificates, such as CE, UL,
Safety Integrated, etc., are valid only when the components described in the
associated catalogs and this configuration guide are used, and installed in
accordance with the configuring guidelines and used properly!
In other cases, such documents must be prepared again by the vendor of
these products!
C
To Next Page
Loading...
