Siemens SIMODRIVE 611 digital - Page 426

C
05.01
C-426
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) -- 05/2008 Edition
Siemens AG 2002. All rights r eser v ed
Version 07/08/15
Note:
In the schematic of the system configuration, only the basic measures to be in
compliance with Directive 89/336/EEC of a typical system configuration are shown.
In addition, especially when deviating from this system configuration, the instructions for
a correct EMC system configuration and of the product documentation and
EMC Design Guidelines for SINUMERIK; SIROTEC, SIMODRIVE (Order No. 6FC 5297--
0AD30--0BPX) should be carefully observed.
S All components that are permitted according to the ordering documentation for the
system group comprising SINUMERIK 840C and SIMODRIVE 611A/D, fulfill, in the
group, Directive 89/336/EEC
S Standard conformance, see Appendix C
*) for I/R module and UI module 28 kW
**) Filter in the module group or separate
Appendix A of the EC Declaration of Conformity No. E002
Typical system configuration
SINUMERIK 840C/SIMODRIVE 611 with analog and digital
konf/erkl/002/anh_a A--10/23
A10:
Fil--
ter
**)
Line terminal
Metal cabinet
Machine base
M
Operator panel
Machine
contr. panel
Re--
actor*)
DMIO
Handheld
HHU
Fil--
ter
**)
611
with analog
Interface
840C
Expansion
device
M
Re--
actor*)
Distr.
box
611
with digital
Interface
SIMODRIVE.
SIMODRIVE
setpoint interface
G
G
CCe
r
t
i
f
i
c
a
t
e
s
/
Decl
a
r
a
t
i
on
s
of Confo
r
m
i
t
y
02.0305.08
Aotewell Ltd
www.aotewell.com
Industry Automation
HongKong|UK|China
sales@aotewell.com
+86-755-8660-6182