Siemens SINAMICS GM150

Required hardware components:
● Prefabricated PROFIBUS or MPI cable
● Field PG
● CP5512 interface adapter (when a laptop is used)
● CP5611 interface card (when a PC is used)
7.2.2 PROFIBUS interface, diagnostics LEDs, address switches
The PROFIBUS connection, diagnostics LEDs, and the PROFIBUS address switch are located
on the CU320 Control Unit.
5'<
'3,
237
02'
5'<
'3
237
02'
ི
཰
ཱ
① X126 PROFIBUS connection
② PROFIBUS diagnostics LEDs
③ PROFIBUS address switches
Figure 7-4 PROFIBUS interface
X126 PROFIBUS interface ①


Figure 7-5 X126 PROFIBUS connection
Start-up
7.2 Description and configuration of the PROFIBUS interface
SINAMICS GM150 6SL3815-2LN41-4AA2
120 Operating Instructions 04/2017