Siemens SINAMICS GM150

8.2.3.8 Language
Language menu structure
/DQJXDJH
0DLQPHQX
Figure 8-14 Language menu structure
Selecting a language
1. Press the <MENU> key.
2. Press the <▼> function key to select the "Language" row. Press the <OK> function key to
confirm the selection.
3. Press the <▼> function key to select the desired language.
4. Confirm with the <OK> function key.
8.3 Parameter
Note
To complement these operating instructions, the List Manual contains an overview of all
parameters as well as a selection of function diagrams to describe the operating principle.
8.3.1 Parameters
The drive is adapted to the relevant drive task by means of parameters. Each parameter is
identified by a unique parameter number and specific attributes. Such attributes are, for
example:
● Readable attributes
● Writable attributes
● BICO attributes
The parameters can be accessed via the following means:
● PC with commissioning tool via PROFIBUS
● Operator panel
Operation
8.3 Parameter
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017 161