9.7.7 Replacing the precharging rectifier
Removing modules
Figure 9-15 Replacing the precharging rectifier
1. Loosen the two plastic screws ① in the cover.
2. Remove all connecting leads. If necessary, remove the cable ties.
Note
Noting the core markings
The cables are equipped with Faston connectors. Make a note of the core markings. When
installing the new module, note the core markings for the cables.
3. Unfasten the five plastic screws ② and remove the module.
Installing a module
Install the new module in the reverse order to when you removed it.
Maintenance
9.7 Repairs
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017 221
To Next Page
Loading...
