Siemens SINAMICS GM150

Old faults
This menu displays the number and titles of the old faults. The top row shows the following
information.
● The total number of faults.
● The time when the fault occurred.
The faults are displayed in ascending order in separate screens.
1. Press the <Tools+> key. Select "older" or "newer" to fetch the fault messages arranged
chronologically.
2. Press the <Help> function key to fetch information about correcting the fault.
Old alarms
This menu displays the number and titles of the old alarms. The top row shows the following
information:
● The total number of alarms.
● The time when the alarm occurred.
The alarms are displayed in ascending order in separate screens.
1. Press the <Tools+> key. Select "older" or "newer" to fetch the alarms arranged
chronologically.
2. Press the <Help> function key to fetch information about correcting the alarm.
8.2.3.2 Parameterization
Parameterization menu structure
The menus that you can call from the "Parameterization" menu using the function keys are
described below.
3DUDPHWHUL]DWLRQ
,QGLYLG'2
$OO'2
3DUDPHWHUL]H
'2VHOHFWLRQ
3HUPDQHQWSDUDPHWHU
WUDQVIHU
0DLQPHQX
Figure 8-6 Parameterization menu structure
Operation
8.2 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017 143