Siemens SINAMICS GM150

3.6.3 Suitable for marine use with individual certificate from Lloyds Register (LR) (option
E21)
The design and implementation of the drive corresponds to the requirements of the Lloyds
Register classification society.
This option contains the following equipment/features:
● Strengthened mechanical cabinet design
● Handrail below the operator panel
● Mechanical cabinet door locking
● Cabinet design in an IP44 degree of protection
● Anti-condensation heating
The drive can be welded to the ship's hull structure.
See also
Anti-condensation heating (option L55) (Page 66)
3.6.4 Isolation amplifiers for optional analog inputs (option E86)
This option provides two isolation amplifiers if an additional TM31 Terminal Module is provided
as an extension of the customer interface and the TM31 analog inputs are to be used with a
higher-level control level for communication purposes. Multifunction interface converters with
the following adjustment range are used:
● 0 V to 10 V
● 0 mA to 20 mA
● 4 mA to 20 mA
The range must be set on the isolating transformer.
3.6.5 Isolation amplifiers for optional analog outputs (option E87)
This option provides two isolation amplifiers if an additional TM31 Terminal Module is provided
as an extension of the customer interface and the TM31 analog inputs are to be used with a
higher-level control level for communication purposes. Multifunction interface converters with
the following adjustment range are used:
● 0 V to 10 V
● 0 mA to 20 mA
● 4 mA to 20 mA
The range must be set on the isolating transformer.
Description
3.6 Description of options
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017 55