Siemens SINAMICS GM150

5.10.3 Removing the dust protection cover of the inverter cabinet
Note
All Makrolon parts that need to be removed are marked with a red sticker and the item number.
3RV
3RV
3RV
3RV
3RV
3RV
3RV
3RV
3RV



$
$
3RV

① Torx screws, size T30
② Expanding rivets
③ Cable ties
Pos. 10 Makrolon plate, rear
Pos. 20 Makrolon plate, bottom left
Pos. 30 Makrolon plate, bottom right
Pos. 40 Makrolon plate, front left
Pos. 50 Makrolon plate, front right
Figure 5-8 Dust protection cover, inverter cabinet
1. Release the Torx screws ①.
2. Pull off the expanding rivets ② using flat-nose pliers.
Installation
5.10 Removing the dust protection cover
SINAMICS GM150 6SL3815-2LN41-4AA2
96 Operating Instructions 04/2017