3. Pinch off what remains of the cable ties ③ with the side cutter and remove them.
4. Remove the Makrolon plates one after the other in the following order:
"Pos. 50"
"Pos. 40"
"Pos. 30"
"Pos. 10"
"Pos. 20"
5.10.4 Removing the dust protection cover of the rectifier cabinet
Note
All Makrolon parts that need to be removed are marked with a red sticker and the item number.
Installation
5.10 Removing the dust protection cover
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017 97
To Next Page
Loading...
