Siemens SINAMICS GM150

8.2.2 Configuration of the AOP30 operator panel
8.2.2.1 Define operation screen
Depending on the type of drive, an operation screen with ten different display parameters is
the default.
9(&7252))
9B'& 9,B,7 $HII
$867 )B2)) +]
3:,5.N:/7,7 
7B/7 r&,',67 $HII
,4,67 $HII8B2)) 9HII
+HOS
FKDQJH
6HO3DU
'LDJ

Figure 8-4 Example of the operation screen
You can customize the display of the operation screen. The following types of display are
available:
● Values
– 2 digital values
– 10 values
The order of the entries in this screen determines the order of the operating variables
(parameters) displayed in the operation screen.
● Bars
– 3 bars
● Mixed
– 8 values / 1 bar
– 4 values / 2 bars
Order of the display: First the parameters to be displayed digitally and then the
parameters to be displayed as bars.
Operation
8.2 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017 131